My Profile

Keep Up to Date:
Blog RSS
Blog
Forum RSS
Forum

reloading

I'm getting back into reloading after many years absent, looking for a nice load for a young whitetail hunter using a Ruger 30-06. Have been kicking around either Hornadys 130gr SP or 150gr SP bullet.
...ng season coming I've been thinking about using it in my 243 Win but can't find a starting load in any of my reloading books (AA, Sierra 5, Lyman 48). I would like to use the Sierra 100 gr SMP prohunt...
I just put my loading station back together after a couple of years of not doing anything with it. BiMart across the street is where I usually get my compnents unless they can't get something. I wante
I started reloading the last part of May 2003. I started with my 30-06 and then moved to my .223. Since then I have reloaded 400 rounds for the 30-06, 350 rounds for my .223 Feeling comfortable with t
...ads (Winchester Supreme et al) are muzzle velocity or 3 ft velocity? Ditto same question on most shotshell reloading formulas... is that muzzle or 3ft that are quoted? I just bount a copy of Lowry...
I sent Hodgdon a email asking how I cant tell the age of the powder I was buying. This was there response: There is a lot number on the bottom of the can. It will read something like this: 109050345
I posted last night and it does not look like it went through. Hmmm. The question was regarding advanatges of Nosler of Sierra as the only Nosler bullets I ever loaded before were .41Mag and I ended u
... from the store. reloaders can get the same proformace out of the 45-70. If you do reoad (which I do limited reloading) then you will find the wall thinknes of the 450 a little bit better and the belt...
I was wondering if anyone on the group could point me towards information regarding shotshell reloading, specifically regarding slugs. I am also looking for any input regarding slug bullet molds, such
Is it o.k. to use two different lot numbers of the same powder (IMR 4350, H4831 SC, etc.) when reloading a group of shells, or should you only stick to one lot number? Doing the math, if 7000 grains
Just started reloading about a month ago. I handloaded 20 cartridges each consisting of a Federal 210 large rifle primer, 44.8 gr. of IMR 4064 powder, 180 gr pointed soft point bullet by PMC in a Winc
While shooting at the range the other day one of my shooting / reloading buddies and I were talking about how to improve my groupings. I measure every powder charge with a scale. He asked if I ever we
i thinking about buying a dillons reloader. they caost around 450 -550 with all the extras. my frend has one and he loves it but he wont missed that much money. i have a single stage and it ok but it
Having difficulties in getting US powders here in Europe and want to put together 20ga standard velocity skeet loads for my 20 ga. Can anyone recommend any loads using European powders (e.g. Vectan, V
Page: 1

Copyright © 2006 - Dec 2008 My Hunting Buddies