bullets
I was wondering if anyone has used Hornady's bullets on game? I have a 308 and a 280 rem that I want to use for moose and deer. Will the Hornady bullets hold together? I do handload!
I need to buy some Thompson Center PTX saboted bullets.I will pay for bullets plus shipping.If anyone knows of someone who has them for sale I will pay a finders fee.Please E-mail me at traders100050...
...ington caliber? If so how did it perform?
I am also open for suggestions on other opinions about other bullets in the 35 Remington caliber. I will only be shooting the 35 Remington bullet in my Th...
I have a Lone Eagle in 35 Rem. I want to start reloading for it. Where is the best source for bullets and what are some loads you guys are using.
What is the smallest bullet you can buy for this ca...
what is the bast round for a 30-30
what about the Winchester supreme power-point plus are they good or not?
Brandon
Most - not all - but most target bullets are made of extremely hard metal and do not expand at all, or, very little at best. They are designe to punch holes in targets.
Hunting bullets are designe...
The neck is really too thin to learn anything about expansion of .44 mag bullets. Not much meat, lotta bone.
The 240 grain XTPs are certainly good bullets, though. A mite too expansive (??) for my...
I agree. Also when getting advice on bullets, pay attention to barrel rate of twist. If mine is 1:28 and yours 1:48, you may do better with heavier bullets.
Nothing less than 41 Mag with hard cast bullets. This would be adequate for black bear and if grizzly 44 Mag with 310 grain hardcast bullets.
...d. It has more case capacity than the 308, I get 3,300 fps with Reloader 22 and Nosler 100 grain partition bullets. It's amazingly accurate, and the ballistics are better than a 270 Winchester (1...
I own a Ruger 77/44 mag bolt action rifle.I have been using 240 grain rifle bullets to hunt with.ARE 180 grain pistol bullets compatible? Ed
...ig. Just be sure to hit him in the boiler room. This year my 6.5X55 (grandson shooting) with 129gr Hornady bullets took two. Both bullets went completely through. I was shooting a .222 Rem and got two...
Hi! You might want to look at some different type bullets, etc. I bagged an elk bull last month with one shot from my 7mm Rem Mag. I used Winchester 'FailSafe' 160gr. I was surprised that th...
...d loads, and 24' or larger groups with mil surplus. A 243 I had shot 3-4' groups of three if the bullets were seated to SAAMI specs for OAL, but sub-1' if I seated the bullets near the ...
With all due respect to Jeff in Texas if he reloads .22 hornet cases with .22 hornet bullets and full powder charges he will get the same result as with factory loads. If he looks around he can get (f...
...ave to decide, I'd probably do it based on the distance you're shooting. The slightly bigger 7mm bullets pack a little more whop up close but the slightly lighter 6.5 mm bullets might shoot ...
..., take a look at the Hornady VMAX 35 grain (worked good in my last .22-250) and Berger MEF 35 and 40 grain bullets. These are extremely fragile, seemingly less likely to ricochet than more strongly co...
...he 338 is my rifle of choice for Elk/Moose. Ammo is cheaper than the 300 Weatherby and you can get heavier bullets when needed. In most Elk/Moose situations you won't need the flatness of the 300...
...or weapon was fine, and the 125 grain bullet would have done fine with a direct shoulder shot.
I use cast bullets of 160-175 grains, 28 grains Re-7, a shoulder shot and everything is dropped in it�...
...ith excellent results out to 350 yards
and a 1" exit hole on 300 lbs mule deer.
165 grain nosler bullets are excellent choise. try them you wont be disapointed. sightin at 1.5" high at ...
Has anyone tried Reloader 17 with 130gr bullets in the 270 Win?
...pt the above. The .308 is used as a tactical round all over, true. But it cannot handle with equal ability bullets in the 180-220 grain class, it simply doesn't have the case capacity. Bullet wei...
... bottom of the case shoulder. 180s and 165s should be no problem at all.
I've loaded 225gr Barnes bullets in .308 too, and measured 2450fps. Now this is a hot load (maybe too hot)! But it sti...
...eyond what most lever actions can handle. and for tubular magazines you must use flat point or round nosed bullets. sure would be nasty to have the rounds in the magazine detonating from the recoil, w...
...t all depends on range. If the rifle is accurate enough ... and hornets vary a lot, the new polymer tipped bullets make the hornet into a potential 200 yard rifle. Put another way, I got more destruct...
If you use bore diameter lead bullets the .54 hits more plumbing, given equivalent shot placement.
...22 Hornet, 30-30 and 45/70 calibers. Right now I have one in 45/70 and I love it. I shoot paper patch lead bullets and can ring the 325 yard gong with some regularity, using black powder and 420 gr bu...
Im using it with 165 gr Sierra SBT...Good groups, looks like a good match with the heavier grain bullets
... 110e in 30/06 it will do 1 inch groups with winchester ballistic silvertips at 100yds . 168 grs try the,s bullets...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Hunting Buddies |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...